PureFlow AirDog FP-100 Manual de Instalação descarregar pdf (Página 10)

PureFlow AirDog

AirDog

FP-100 & FP-150 Dodge 1998.5 - 2004

Section 4 AirDog

& Mounting Brackets

Installing the AirDog

& Mounting Brackets on the Truck’s

Frame, cont’d!

NOTE: The AirDog® can be mounted on either the inside or the outside of the frame, as

space or personal choice dictates.

Mount

The AirDog®

Outside

The

Frame

Figure 8 OR Figure 9

Inside

The

Frame

Figure 10 Figure 11

For this installation, the AirDog® is mounted inside the frame!

4-5. Clamp the frame between the AirDog® bracket assembly and the backing plate using

the bolts, lock washers, and nuts included in the kit.

Figure 12

4-6. Position the AirDog® on the frame as necessary for clearance.

NOTE: Be sure to mount the AirDog® so the ‘FUEL IN’ port is directed toward the rear of

the vehicle.

Figure 13A

Figure 13B

NOTE: Some pickup model frame rails have a bracket that is used to support the frame

during the manufacturing process. If this bracket is on your frame rail and obstructs the

proper positioning of the AirDog® mounting bracket, you may remove part or all of it, as

needed. Be very careful not to damage the frame flange!

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sem comentários

PureFlow AirDog FP-100 Manual de Instalação Página 10